How can I make 2 or 3 line imprints?

The e-mark (create) cannot only print one line, but also 2 or 3 line imprints. Please find instructions for creating such imprints and how to print them below. The maximum sizes of imprints are:

• One line á 14 x 150 mm
• Two lines á 14 x 75 mm
• Three lines á 14 x 50 mm

Create a 2 or 3 line imprint in the app

1. Go to New Imprint
2. Select one, two or three lines
3. Design your imprint in the editor
4. Send it to your e-mark by clicking on print in the top right corner

Alternatively, you can also choose one of the 2 or 3 line templates in the app and edit it.

Printing a 2 or 3 line imprint

When printing a multiline imprint, it is recommended to listen to the beeps of your e-mark - it will tell you when to change direction for a new line. Watch our video "Making a multiline imprint" below.

1. Take the e-mark from the docking station, put it on paper and start to move it to the right (or left) until you hear the first beep
2. Then move the e-mark downwards until you hear the next beep
3. Now start the second line by guiding to the left (or right) until you hear the next signal
4. Move the e-mark again downwards until the beep
5. And finally print the third line until you hear the last beep

Tips:

• Never lift up the e-mark during a 2 or 3 line imprint from the paper, otherwise it starts to print from the beginning again.
• Please be aware that a 2 or 3 line imprint needs a little practice. Don't worry if your first try is not perfect :)